|
Areas
of application for different wood assortments
Small
heating systems up to 150 KW
-
Dry
wood chips
- Dried wood chips (8% humidity)
- Pellets
For
these systems it is important that the fuel doesn’t
take up much room and that the heat is available when it is
needed. These demands are met by pellet-heater or log heater
combined with a buffer for hot water. Precondition for trouble-free
operation is dry fuel. Fireplaces and tiled stoves can be
useful completions to central heating systems.
Medium
heating systems 150 KW – 1MW
-
Wood chips / shavings from shapers; fresh
- Untreated old wood A1
- Wood chips from the forest / cut wood from the landscape
architecture
In
this range of capacity only automatically charged heating
systems are possible, because charging by hand would be
too costly. With increasing power fuel of a higher degree
of humidity can be used.
Large heating systems / thermal power-stations from
1 MW
-
Bark, wood chips, shavings from shapers ...
- Old wood A1, A2
- Wood chips from the forest / cut wood from the preservation
of the countryside
If
the heating system contains a filter and has the approval
of the authorities, almost all wood fuels may be burned.
|
